The new version of the C920 camera rework kit. It enables the use of C and CS-mount lenses with a consumer-grade USB webcam.
Please contact us before placing an order!
Key changes mk1 vs mk2:
- USB MINI was replaced with a USB-C connector with lock screws
- Easier to assembly
- Smaller
- Compatible with Arca Swiss plate
- Does not have integrated Tripod mount (should be used with optional mount plate)
C920 webcam still holding strong since the 2012 year. Though new models were released since:
- C920 - original webcam. A not long time ago Logitech dropped h.264 support
- C930 - should be used if h.264 is needed (this compression should be enabled for a while)
- C922 - another compatible camera
C920
family cameras produce good picture quality and can do real full HD
streaming (1920×1080p @ 30fps). Also, these cameras are well known for
good support for machine vision applications including OpenCV.
Included parts
- Aluminum case
- M2.5x8 screws x4
- M2x4 screw x2
- M1.6x4 screw x4
- USB board
- 2x Allen/hex keys (1.5mm and 2mm for included screws)
- Kynar wire
- Tripod mount plate kit is optional
Tool/material set required
- Logitech C920/C930 camera
- Soldering equipment
- Pliers
- Screwdrivers (PH00 or PH0) for original C920 screws
- Image sensor cleaning tools materials
Resources
- 3D model can be found at GitHub
- Rework instructions on the wiki
- Rework video on Youtube
Notes
- This kit is fully compatible with C920 and C922 and C930 cameras
- Lens not included
- The filter can be chosen from the drop-down menu or as a separate item
- This is a DIY part set (if the kit-only option is selected). Buyer must have soldering knowledge and skills, tool and material set for disassembling and assembling these cameras
- Due to obfuscated nature of Logitech product naming, if a reworked camera is ordered it is possible you will get older, newer, stream, or any other version. Please contact us if you need a specific version
- Reworked cameras are not stocked and made to order! Lead time can vary from 1 to 3 weeks, but in some cases, it can be on stock. Please contact me if your timing is critical before placing an order
- Filter selection notes
C920/C922/C930 enclosure kit for CS-type lens mk2
- Product Code: C920_REWORK_KIT2
- Availability: Back-order
-
58.00€
Available Options
Related Products
Customer C920 camera rework fee
This is the fee when customer sends us his own Logitech C920 camera. Case, filters, lens and all oth..
20.00€
Logitech BRIO 4K Pro rework kit mk2
Rework kit mk2 for Logitech BRIO 4K Pro web camera. It allows using full advantage of CS-mount or C-..
60.00€
2.8-12mm CS lens (5MP)
Universal lens with manual focus, zoom and iris for CS cameras. Suitable for high pixel density sens..
53.00€
USB-C USB cable 1.5m (with lock screws)
Double shielded customized USB USB-C cable with lock screws. FeaturesData wires: AWG32Power wires: A..
19.50€
Tripod and Arca-Swiss mount plate (for C2 and C920) kit
Tripod and Arca-Swiss mount plate (for C2 and C920 mk2 kit). This mount plate is designed to..
19.00€
IR CUT filter (for C1, C1 PRO, C920 and Brio reworked cameras)
This filter is manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can be used for all o..
16.00€
Longpass filter (for C1, C1 PRO, C920 and Brio reworked cameras)
NIR (Near Infra Red) filter is manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b..
19.50€
Screw in low profile NIR filter for CS and C-mount cameras
Screw in low profile NIR filter for CS and C-mount cameras. Designed to be used between a sensor and..
35.00€
Screw in low profile IR-CUT filter for CS and C-mount cameras
Screw in low profile IR-CUT filter for CS and C-mount cameras. Designed to be used between a sensor ..
35.00€