Longpass filter is manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can be used for all other applications (like astronomy)


Dimensions and mounting diagram

  • WxH: 17x17mm
  • Thickness: 1mm
  • Wavelength: >850nm

Packing

  • One piece of IR pass filter

Notes

  • This filter is used to see only INFRARED light

A longpass (LP) Filter is an optical interference or coloured glass filter that attenuates shorter wavelengths and transmits (passes) longer wavelengths over the active range of the target spectrum (ultraviolet, visible, or infrared). Longpass filters, which can have a very sharp slope (referred to as edge filters), are described by the cut-on wavelength at 50 percent of peak transmission. In fluorescence microscopy, longpass filters are frequently utilized in dichroic mirrors and barrier (emission) filters. Use of the older term 'low pass' to describe longpass filters has become uncommon; filters are usually described in terms of wavelength rather than frequency, and a "low pass filter", without qualification, would be understood to be an electronic filter.

Write a review

Note: HTML is not translated!
    Bad           Good

Longpass filter (for C1, C1 PRO, C920 and Brio reworked cameras)

  • Product Code: F2HIGH850
  • Availability: Out Of Stock
  • 18.50€


Related Products

USB camera C2 (board level with M12 lens)

USB camera C2 (board level with M12 lens)

New C2 family camera C2_BOARD_FFC_M12 with Sony Exmo R Starvis IMX290 sensor offers h.264/MHPEG/YUYV..

120.00€

USB camera C3-234 (global shutter, M12 lens)

USB camera C3-234 (global shutter, M12 lens)

Designed with a focus on versatility, the C3-234 USB Camera is your go-to solution for a myriad of..

143.00€

Tags: IR, Filter, 850nm, low pass, NIR