Ethernet camera module build log #3 – Network
Was debugging strange Ethernet behavior. The driver reported the opposite status of plugged RJ45 cable. It turns out I did not have a 100M RJ45 connector with integrated transformer and soldered 1000M by mistake. Good thing Würth Elektronik delivered new connectors very rapidly.
![De-solder](https://www.kurokesu.com/main/wp-content/uploads/2022/07/2022-07-11-18.37.56-1024x768.jpg)
![A mess after desolder](https://www.kurokesu.com/main/wp-content/uploads/2022/07/2022-07-11-18.49.09-1024x768.jpg)
![Clean](https://www.kurokesu.com/main/wp-content/uploads/2022/07/2022-07-11-18.51.23-1024x768.jpg)
![All done](https://www.kurokesu.com/main/wp-content/uploads/2022/07/2022-07-13-11.48.03-1024x768.jpg)
And after a quick rework job network is alive! JBC C245-949 cartridge was very hadny to de-solder RJ45 connector without damaging board nor connector.