While there are countless MIPI CSI-2 camera cables, the most common ones are 15-pin / 1mm pitch or 22-pin / 0.5mm pitch, compatible with Raspberry Pi and NVIDIA Jetson platforms. Kurokesu cameras use the 22-pin / 0.5mm pitch format with all four CSI-2 lanes routed. The majority of the market is covered by plain FFC […]
Read MoreNew 20M IMX283 1″ CSI-2 Camera Module
It’s been just a few weeks since the “coming soon” teaser in our last CSI-2 camera family update, and the promise is now a product: meet the 20M, 1-inch IMX283 camera module. The sensor outputs 5496×3672, and it keeps the familiar 22-pin, 0.5 mm-pitch FFC interface, 4 MIPI lanes, with synchronization signals on a dedicated […]
Read MoreNew camera modules with CSI-2 MIPI interface
We are working non-stop to offer the best cameras for your next projects! Today we’re unveiling three new board level cameras powered by image sensors: Onsemi AR0822, Onsemi AR0234, and Sony IMX477. And that’s not all – here’s a first teaser of our upcoming 1″ 20 MP module. All three newcomers share the same dimensions, wiring, and […]
Read MoreIMX462 in C3 family – details
We’re expanding the Kurokesu camera family with new models built around the Sony IMX462 image sensor – a standout performer in low-light and near-infrared environments. Designed for starlight-level sensitivity, this sensor offers exceptional performance in dim scenes. Sensor specifications The Sony IMX462 is a 1/2.8″ CMOS sensor optimized for low-light imaging, featuring high sensitivity, low […]
Read MoreC3 camera series gets low-light upgrade
We’re excited to launch our new C3 family cameras featuring the Sony IMX462 image sensor. This upgrade delivers twice the low-light sensitivity compared to our previous C2 models, along with significantly improved performance in near-infrared (NIR) lighting conditions. The update applies to M12 board cameras, CS-mount boxed cameras, and motorized zoom variants, bringing enhanced visibility […]
Read MoreIMX477 camera board for motorized zoom lenses
With the introduction of motorized zoom lenses, the next logical step was matching the sensor board. Sure there are countless suitable sensors from various manufacturers like Sony semiconductors, Onsemi, Aptina, and many more. But lack of good support from the SOC side suggested starting from IMX477. It is a reasonably modern 12M image sensor used […]
Read MoreC2 family cameras
C1 family cameras have been a great success with installations around the world (eyes for underwater and flying drones, scientific process observation flying 408km above the Earth on ISS in a low gravity environment, many universities doing computer vision researches, a few industrial environment installations, and many more) It is time to start introducing new […]
Read More